Shown here is a Hypneumat M350EHB unit with a right-angle milling head. The unit is powered by a 1.5 HP 1762 rpm brake motor and includes a push type hydra-brake and spindle positive stop.
Right-Angle Milling Head
read more
Self Feeding Drill Units
10” Stroke Drilling Units
Here are four Hypneumat DQ310EHB drilling units with ER40 spindles and 2 HP 3600 rpm motors. The motors are mounted using our motor mount belt guard. Per customer’s request, the units have 10″ of stroke, silicone-filled hydra-brakes, sealed bearings, and oversized...
5 Drilling Units with Commander 850 Multi-Heads
These five M style units are equipped with Commander 850 series multi-heads. The multiple spindles heads each include guide rods and five adjustable spindles.
FX34 with Counterbalance
The Hypneumat FX34 Ball Screw Rail Unit has 4″ of stroke, is equipped with a 1-3/8″ straight bore spindle, a counterbalance, and has servo motors for the linear feed and spindle speed. This auto-feed unit will perform a tapping operation. The servo motors allow for...
Billet Style 4-Spindle Head
Hypneumat made this custom billet-style 4-spindle multi-head for a customer’s application. This head is powered by a Hypneumat DQ46EHB auto-feed drilling unit.
DQ500 and Commander 4-36
This Hypneumat DQ56EHB drilling machine drives an 8-spindle Commander 4-36 multi-head. The machine rests on a 54″ by 48″ table and uses a 5 HP 1200 rpm motor.
Three M Units with Tight Pattern
These three M-series (direct drive) units with varying lengths are capable of drilling holes at closer centers that would not otherwise be possible with our standard auto feed drilling units. The center unit has an extended rear housing so the 1 HP, 3600 rpm motors...
DQ46EHB with Quill Stabilizer
A Hypneumat Quill Stabilizer option can be added to our auto feed drilling units allowing for a rigid tool feed to offset high side load applications. This also provides an accurate and concentric tool feed for tight tolerance drilling and reaming operations. The...
FX38 Rail Unit with HSK-C-50 Spindle
Shown is our FX38 Ball Screw Rail Unit equipped with a precision ground HSK-C-50 series spindle and Guhring clamping mechanism. The axial movement is powered by a 1.0 kW Mitsubishi servo motor, and the spindle a 1.5 kW servo spindle motor. Unit capabilities are 815...
Opposing Drilling Unit Machine
This Hypneumat Machine consists of 2 opposing DQ46EHB drilling units with ER40 collet nosed spindles, 3 HP VFD motors mounted on a 7’ long machine base wired with full controls and ready for customer’s part fixture. Application: drilling 21/32” holes in forged...
Connect With Us